feed pellet making machine for making cattle feed with high performance

This series pellet machine can be powered by both diesel engine and electric-motor. We adopt the new design of direct connection of motor shaft and the main shaft that overcome the loose defect of belt connecting as long time using. When the raw materials are added in the feed pellet making machine champer by pressing roller, they will be heated to 60-80 degrees by the friction among them. After being pressed through the flat die, the fodder will be thrown out from the  feed pellet making machine in a state of granule. You can choose the size of the granules by using different flat die with different size of holes in it

features of pellet making machine
1. the feed pellet machine has simple structure, suitability is wide, cover an area of an area small, low noise.

2.powder feed, toppings don't need (or a little) liquid can be added for granulating.

So the moisture content of granule feedstuff materials for granulating basic before the moisture content, more benefit at the store.

3.and the high hardness, made of granular surface is smooth, internal maturation degree,

can increase nutrition sufficent digestion absorption, and can kill general pathogenic microorganisms and parasites, suitable for feeding rabbit, fish, ducks

and other animals than mixed powder feed, can obtain more economic benefits.
4. the animal feed pellet making machine has Low noise, low malfunction, strong anti-overload, and continuous production of non-card machines.

5.The pressure roller, templates, high-quality wear-resistant, anti-fatigue Steel.

6.Adopt German vacuum furnace heat treatment manufacturing processing and service life

extended by 5-7 times than the other.

plate die feed pellet mill to make animal organic pelleted feeds for farm

1.Pelletizing by a flat die feed pellet mill is the process of making waste materials into pellets. The pellets are then used for thermal combustion. feed pellets are one of the most common products of pelletization.

2.feed pellets can be made from any type of grains like corn powder,wheat straw powder,rice husk,fish bone powder,corn cob powder,and so on

3.The moisture content required for this pellet mill should be less than 15%, and grain size below 5*5 mm.

4.With high-precision gears can make the working stability and long time.

features of feed pellet mill

1.The feed pelleting machine accepts the dry materials(The moisture of raw materials is not less than the national standard of 13% ). Differential and universal joint driver is adopted. Both the motor or diesel engine are OK.

2.the pellet mill can also be used to make Organic fertilizer, inorganic fertilizer,biological organic Fertilizer can be produced. The processed products are ball granule with uniform size. Its fluidity and solubility are good, the intensity of products is high and the fluidity is good.

3.The use of unique technology for this animal feed pellet making machine can complete the whole process of low-temperature drying, cooling and screening in one passage. The results show that this process is easy in operation and low in cost with a high survival rate of biomass microorganism bacterium > 90%.

animal feed pellet making machine with electric motor control box used at home

Our feed pellet making machine take the most advantage of flat die feed pellet mill machine technology.The service life is 3-5 times more than the average machine . the pellet mill is used to process the raw materials without crushing such as corn, soybeans, barley grain into fodder for rabbit, fish, chicken, duck, goose, horse, cattle, donkeys, sheep, pigs and other animals. .the animal feed pellet making machine can be dried into dry out without adding water , and glossy particles forming rate is 98%.

Directly before the pelleting press, a raw materials with a granular size of approxly must be about 4 mm and a residual moisture content of approx. 15 % is required. The feed pellet making machine adopts speed-adjust feeder to control the feeding capacity, and use big diameter modulator to make materials fully cured, and make the pellet smoother. The formation rate reaches 98%. The final size of the product is between 4-8mm.

features of feed pellet making machine
1. The animal feed press machine makes high density, smooth surface, ripe inside feed which is good for the animals to assimilate.

2. the feed pellet making machine has Low moisture animal feed made by the feed pellet mill machine is benefit to storage.

factory supply feed pellet mill with production yield 500kg/h for making animal feed

1, the feed pellet mill has simple structure, strong adaptability with low noise.

2, the moisture content for raw materials required is at below 17% thus  It’s more conducive to storage.

3, the mechanism of the particles into a high hardness, smooth surface, the degree to deploy more fully, the pellet mill can improve digestion and absorption of nutrients, but also kill disease-causing microbes and parasites in general, the feed pellet machine is suitable for breeding rabbits, fish, ducks chicken and other animals and experimental animals than the mixed powder is loaded feed may be more cost-effective manner.

4, the model feed mill for making pellets is with a variety of aperture diameter of 1.5-20mm die, which is adapt to different materials, granulation, to achieve the best results.

5 the feed pellet mill can adapt to different materials to ensure the suppression effect. Wood chips, corn stalks, etc. takes a lot of pressure compression molding, in the same granulating equipment, stick-round parts are the center of the entire equiKLFent, parts, and the use of high-quality alloy steel, improved stick-round life.

Features of feed pellet mill

a. the feed pellet mill has High efficiency and output with low energy consumption:

b.The pellets produced by the feed pellet mill are smooth and even, of high standard hardness and heat value.

c. the animal feed pellet mill is a Movable machine with motor, which creates no oily fume or pollution with low noise and good forming pellets

China supplier poultry feed pellet mill for making your own pellets for your animals

using poultry feed mill for making your own pellets for your animals

feed pellet mill is new generation of energy-saving poultry feed mill for making pellets, researched and developed by our researcher newly. the feed pellet mill is mainly used to compress crushed corn straw, corn powder,wheat powder, grass meals, sunflower stalk powder, straw, rice husk,and etc. into cylindrical shape particles. Raw material moisture required for the poultry feed mill is 10%~17% before enter into the pellet mill.

the feed pellet mill can be configured to diesel engine or electricity motor , the home use small pellet machine is mobile flexible and simple to operate; Diesel engine, e. motor and tractor PTO shaft power is optional by customer’s request.

1. Electric flat die feed pellet mill is driven by electric motor which makes it more energy-saving and environmentally friendly.
2. Roller and flat die of the poultry feed mill are made from precise material of alloy metal which makes this core part wear-resistant and not easy to break, besides, both sides can use the flat die, thus having a long service life.
3. the small Pellet machine adopts two or three pair of rollers ,high efficiency, uniform pellet size.
4. Quick disassembling type of precisely-cast die clamp is adopted to connect the die and quill flange,which is able to change new die and rollers fast and conveniently according to your needs.

home use pellet machine for making your own pelleted feed to save cost

home use small pellet machine for making feed pellets for your own farm

the small pellet machine is one new kind of gear box which is better than old model, and the home use small pellet machine is good to make sawdust pellets and feed pellets.It also can make the oil cake for the feedstuff , which could be granule pellet for the fish, chicken, animal, etc.The final size is Dia 6,8,10,12mm for the sawdust pellet , and 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, etc.

Advantage of small pellet machine

1. we use the cold pressing molding technology and polishing integer process to ensure the small pellet

machine have good apperance and compact structure.

2. the pellet machine can continuous working for long time, high output, low power consumption ,low

noise ,low failure.

3.The feed pellet pellet Machine adopts special quality materials and advanced shaft driving device , the main

parts is made of igh quality alloy steel adds

4. the feed pelletizer machine is suitable for large farms, organic herbalmedicine and chemical industry etc, and the raw materials can be corn powder,rice husk,wheat straw powder,grass meals,wheat, and etc

5. the electric control panel is adopted. All feed pellet machines can be interlocked and safety, alarm device is available. The operation is simple and convenient;

floating fish feed pellet mill for making fish feed pellets

The floating fish feed pellet mill can convert corn, wheat, flour etc material into high density pellets for fish feed pellets. The final pellets can float on the water more than 24 hours.This pellet mill machine is specially used to make floating&sinking fish feed pellets, different shapes food for dog and cat. By changinng the mould, the floating fish feed pellet mill can produce different size pet food. The food are nutrient and healthful for the pets.

After the material is sent into feeding device, they will be extruded and expanded by the screw shaft of the fish feed pellet machine with high pressure and temperature which makes the raw material fully cooked and sterilized. Then the expanded material will be formed into pellets by shaping mould. You can change different moulds to make pellets with different diameters. After that a cutting device will cut the formed pellets into different length as required

Advantage of floating fish feed pellet mill

1.International advanced cutting technology, the use of soft cutting forms, achieving stepless, anywhere out of the material can be cut into the required length of the product, is not easy to have a Burr.

2.the fish feed extruder has Innovative design, unique, simple structure, easy to install easy unloading easy to dismantle, easy operation.

3.Screw and threaded with special wear-resistant, heat-resistant alloy steel material and heat treatment, and has the advantages of wear resistance and long service life.

4.Within the unique Turbo-die device, ensure that the forage yield and quality and fitted with electric heating devices, improve feed extrusion rate.

5.Y series three-phase Motors main motor adopts high quality, ensure that the power is strong.

6.Variable-speed feeding device, easy operation, feeding evenly to prevent machine being blocked.