ring die pellets mill is more efficient and suitable for industrial poultry feed pellets production-large farms

Different from flat die feed pellet mill mainly used for making pellets for their own animals,ring die pellets mill is more efficient and suitable for industrial poultry feed pellets production-large farms or feed pellets factory. Equipped with conditioner, this pellet mill equipment can make the material fully mixed and ripen, thus the finished feed pellets have more smooth surface and better quality. Featured by high throughput and low consumption, ring die poultry feed pelletizer has enjoyed great popularity.,Ring die pellet mill is an ideal pelletizing machine for high quality feed pellets. Before pelletizing, grains such as corn, wheat, rice and soybean etc. need to be crushed into powder with livestock feed grinder mixer,Also they should be mixed throughly with a mixer since other additives may be added to ensure a balanced feed formulation. The finished feed pellets have a  smooth surface and easy to digest for animals. Therefore ring die feed pellet mill is widely adopted by livestock farm, poultry farm, feed processing industry and aquaculture. 
Ring Die Feed Pellet Mill Features 
1.Adopted pheroidal graphite cast iron structure and permanent magnet device, aerodynamic technology reduces the temperature in pelletizing chamber to around 90°C for machine works continuously.
2.Treated by hardness quenching and milling machine,the gears maintain high concentricity with the shaft, Thus ensuring a good performance and large capacity than belt driven models.
3.With lubrication system, you can add grease to main shaft without powering off the machine.
4.Equipped with an advanced compensation serpentine-spring coupling which connects the pelletizing chamber with the motor to increase safety and stability.
5.Conditioners can be mounted above pellet machine where liquids such as water and molasses can be added to improve palatability. The more conditioner, the higher feed pellets quality.

Working Principle of Ring Die Poultry Feed Pellet Mill

The material is put into the screw feeder which can be easily adjusted for the feeding speed and getting proper material flow. After this, the material goes into a conditioner where hot steam can provide favorable conditioning. Then, the material temperature is maintained about 64-85 °C and moisture between 14-16% before entering the pressing chamber. In the pressing chamber, materials will naturally be compressed into pellet form through the die holes under the high pressure of rollers.

originally this flat die feed pellet mill is designed to make feed pellets, flat die pellet mill was popular in early years

originally this flat die feed pellet mill is designed to make feed pellets, flat die pellet mill was popular in early years. Taking customers feedback and energy market into consideration, we have absorbed the technique and brought it into feed pelletizing filed. For the users who just want to recycle their agricultural waste such as corn stalk, rice husk, wheat bran,etc, investment in flat die wood pellet mill is a desirable and wise choice.
Wood Pelletizing Process of Flat Die Pellet Mill
Wood pellets are produced by compressing the biomass material which is first grinded to provide a uniform dough-like mass. Then the mass is fed to a pelletizing chamber and formed pellets through a die with holes of the required size. The high pressure of the press makes the temperature of the wood increase greatly and the lignin slightly forms a natural "glue" which is a substance that holds the pellet together. The size of pellets is generally kept to be about 6mm diameter and 25mm length in the form of a cylinder. Of course, we can customize dies with different die holes.

Poultry feed is very important for breeding industry, but it is also troublesome to mix feed for the poultry every day. With the introduction of electric poultry china feed pellet mill, now we can easily make powder feed into poultry feed pellets. Our electric poultry feed pelletizer is specially designed for small poultry farm or home use: driven by electricity, small body, light in weight and simple operation. Most important, the feed pellets produced by this electric poultry feed pelletizer have rich nutrition, good palatability and high digestibility.

Performance Features of Electric Flat Die Feed Pellet Mill
1. Driven by electric motor makes it more convenient and environmentally friendly.
2. No need to add extra water to the powder feedstock before pelletizing.
3. To make feed pellets with different diameters, you just need to replace a pellet mill die.
4. High temperature and pressure during the pelletizing can kill all kinds of parasitic ovum and other pathogenic microorganisms, reducing digestive system disease of poultry.
5. Low consumption, competitive price, long service life.

fish feed machine for sale regard as advanced single screw extruder by belt drive has won lots of popularity

fish feed machine for sale regard as advanced single screw extruder by belt drive has won lots of popularity and is widely accepted. The feed extrusion machine serve the purpose of sterilization and ripening under high temperature and high pressure. It generally includes dry type and wet type. Pellets produced by this china feed pellet mill are solid, water resistant and damp resistant.Extrusion can be defined as a technological process namely, forcing feed raw material in one or more of the following process conditions (such as mixing, heating, cutting, etc.) flow through the die, make material forming or eruption gasification. Making feedstocks from loose state into a continuous shaped dough, the resulting paste is extruded through holes in a metal plate. The diameter of the holes sets the diameter of the pellets, which can range from various different sizes.
Floating Fish Feed Pellet Machine Characteristics
1.Equipped with impeller feeder, advanced frequency convertor and magnetic device for uniform feeding and reliable operating.
2.The Reasonable combination of practical spindle bearing ensures reliable and safe operation.
3.Adjustable pellets lengths are made through changing various dies.
4.The finished pellets can keep floating for 3-15 hours without pollution to water.
5.Dry type and wet type fish feed machine for your choice.The wet type machine needs a boiler to make steam which can conduct steam to the conditioner and ripen the raw material in advance. The output is higher than the dry type machine in the case of the same power. So wet type machine is more suitable for large scale production.

9FQ System animal feed grinder is the most ideal milling equipment

This type feed grinder mixer machine group can crush all kinds of feed,such as corn,sorghum,grain, legumee,broke cake pellet,soybean,small fish,small bone and others,the feed grinder mixer machien is very suitable to produce powder/mash feed for laying hens,low invest,crush thoroughly, stir well, free to adjust the raw material mix proportion.the poultry feed mill have high production capacity up to 3t/h.Equipment made by thick carbon steel,so have long service time at least 15 years.

As the feed crushing and mixing process of our SH-250 feed pellet production line,if customer want to produce pellet feed in the future,it easy to expand and modify production line.Help customer save purchase cost.The capacity we can design according to the customer demand,hammer mill can change use item 140 or 40 or 50 hammer mil.feed hammer mill output about 2-3t/h.Match the mixer 1t/batch,2-3t/h.This unit including One hammer mill,one single shaft horizontal mixer,two screw elevator,two cyclone,it also can add another screw elevato to transport mixed feed into Silo.Use to store the finished feed.

1. 9FQ System animal feed grinder is the most ideal milling equipment of all kinds of wood pieces, straw, grass, stalk, tree branches, waste cardboard, bamboo, wood scrap, corn stalk, peanut shell, wheat stalk, wood fuel, cotton stalk, biomass shell and so on.
2. This kind of animal feed grinder is widely used in swine farm, wood factory, etc. Hammer mill is equipped with high carbon steel blade. The raw materials can be crushed into straw particles, whose diameter is 35mm. The durable hammer mill works with high efficiency and gains more good reputation from European users.
3. The grinder mixer machine could be driven by the diesel engine, motor, tractor, etc.
4. The kinds of feed grinder machine could be matched with mounting plate for motor or diesel engine, and collector.

poultry feed grinder machine is used to grind dry brittle materials, such as spice, seasoning, pepper, aniseed,

poultry feed grinder machine is used to grind dry brittle materials, such as spice, seasoning, pepper, aniseed, ginger, garlic, coffee beans, cocoa beans, herb or medicine, tea leaves, grains,wheat, corn,rice, soybean, green beans, red beans, feed, tobacco, tea leaf, chemical materials ,dry vegetables, dry fruits, and so on.the poultry feed grinder is widely used in food, feed, chemical, medical or pharmaceutical, refractory, non-metallic, abrasive, metallurgy, construction materials and agricultural industries.and it is used with feed pellet mill to make poultry pelleted feed,The crushing chamber realizes waterdrop type; unique inlet air way avoids circumfluence phenomenon in the crushing process; equips "U" type hitting groove in the bottom of the crushing chamber, which enhances the output; quick-start full opening operation door, elasticity screen, easy to maintain and replace screen.

Uses import bearing to guarantee the service life; The nylon stick coupling drives directly, effectively avoids bearing radiation. Through dynamic balancing check, the rotor runs more stably, the noise is lower, and the performance is more ideal;
Feed port locates in the top of pulverizer, which can match with each kind of feed mechanisms. Through adjustment, this machine can realize coarse cracking, fine cracking, minuteness cracking, one machine multipurpose.
It is suitable to high quality poultry material, aquatic product material, alcohol plant, citric acid factory and so on.


poultry farms grain grinder crusher and mixer:

1. Animal feed grinding and mixing machine is designed for rural small farms, small and medium raise animals into thinking, with the design of small animal feed factory , feed processing equipment,set the vertical ascent, and mixed warehouse, level transporting as one.

2. Stirring pot single can stir 1000 kilograms, two motor powers , the concrete function will be material self-priming to crushing work onboard, then the shattering of the material, the crushed material can be after the completion of the pipe into through the side to mixing work on board for mixing.

3. The animal feed grinding and mixing machine concrete mixing, mixed rate is high. Can production premix,enrichment material, powder, etc.

4. The most suitable for small farmers use, pigs, cows, horses, rabbit, chicken, fish, etc.

Working principle of animal feed crushing machine

9FQ animal feed grass herbage hammer milling/crushing machine

corn crusher, corn crushing machine, grass hammmer mill, grass grinder, branch crushing machine, straw crushing machine, nut shell crushing machine, corn stalk crushing machine, herbage crushing machine,the feed crusher machine is suitable for grinding corn, wheat, beans, grains, straw, vines, dry fresh potato, leaves the shell, such as food and feed, can also be shattered wood, branch, gypsum, aluminum powder, rare earth, chemical, pottery clay, coal and other minerals low hardness, and can crush a variety of traditional Chinese medicine.this machine is mainly used for crushing and mixing all kinds of dry animal feed. screw conveyor, crusher and mixer are concentrated in one, so it occupy a small place and easy to install and carry. And the feed crusher machine crusher can absorb the raw material by itself.the animal feed crusher machine is used with feed pellet mill to make poultry feed pellets


Working principle of animal feed crushing machine


When working, the material to be processed from the hopper into the crushing chamber, by the high-speed rotation of the working parts of the fight against and rupture, while changing the direction of movement of the material, due to high-speed rotation of the working parts of the destruction of the material layer deposition, In this process, the particles are repeatedly subjected to the impact of the working parts and the body and the collision between the particles, friction, which is gradually crushed to the geometric diameter is less than the diameter of the screen in the centrifugal force and airflow under the action of crushed material Through the sieve hole into the crushing chamber from the discharge port.

model 125 is a small pellet mill driven by diesel engine. It is mainly consisted of feeder

model 125 is a small pellet mill driven by diesel engine. It is mainly consisted of feeder, flat die, roller, gear bearings and diesel engine. It is generally used for pellet making in small scale, like at home or on farm. This small pellet machine can process various materials into fuel pellets and feed pellets. It is in small size and with compact structure, making it preferred by farmers and home users.

Spotlights of small flat die pellet machine for home use
1. It is in small size and with compact structure.
2. the small pellet mill is at relative lower price.
3. the small pellet mill is suitable for home use or farm use.
4. the small pellet mill can be operated and maintained easily.
5. It is driven by diesel engine, making pellets production possible especially in places where electricity is not easily available.

Material----Both the roller and die are the most significant parts of a flat die pellet mill. Pelleting is completed mainly with the help of roller and die. So they must be wear resistant. We provide rollers and dies which are made of alloy metal. Also, if you desire pellets of different sizes, we have various dies for your choice.
Life span----Due to the abrasive nature and pressure of compression, rollers and flat die are damageable parts. Many buyers are very concerned about the service life of die and roller. In fact, the material of die and roller is a factor. But, the lifespan also depends on how often you use it; what kind of biomass you pelletize, and whether you operate and maintain the machine properly. Take sawdust pelletizing for example, constant operation for 4-8 hours per day for over 6 months will wear down the die and roller. Then you need to replace them. If the pelletized materials are softer biomass like grasses, leaves, the die and rollers can last over one year.
the feed pellet mill price is also noteworthy that the thickness of flat die will affect the quality of pellets. When the die is thicker, the pelletizing process will be longer, the pellets will be denser, and the appearance of pellets will be smoother. And the life of die will be longer.

What Raw Materials can be processed into Biomass Pellets?

What Raw Materials can be processed into Biomass Pellets?
There is a wide application of raw materials, such as wood, sawdust, straw, chaff, bamboo shaving, peanut shells, bagasse, alfalfa and other raw materials, etc. All the forestry and agricultural scraps can be made into small wood pellets. But different materials have different request to moisture and size. Generally, moisture of raw material is near 15%. Under this situation, pellets produced will have perfect quality. But materials whose lignin or sugar content is high will need less moisture. For the size of raw materials, it should be no longer than the diameter of die holes. For example, if the diameter of die hole is 6mm, while the size of raw materials is near 8mm, there will be accumulation or even damage inside the pellet mill. Anything you can think of raw materials, our biomass pellet mill can help you achieve the aspiration of pelletizing.

Feed pellet mill is widely used by people who breed chicken, rabbit, cow, sheep, cattle, pig, and so on. The reason why they make feed pellets is that pellets are a balanced combination of different kinds of nutrition for the better growth of livestock, poultry and other animals.

Raw materials for animal feed pellet mill:

The raw material can be corn/maize, alfalfa, wheat bran, grass, rice, beans, oil cake, etc. Usually, large size raw materials should be pulverized by hammer mill feed grinder. Protein or other nutrients can also be added to the raw powder.

Why choose victor flat die feed pellet mill?

victor pellet mill has Low cost, convenient operation and maintenance
High yield, energy-saving and environmental friendly
It covers a small area
Various power sources are available: electric motor, diesel engine, PTO, gasoline engine, you can choose according to your own needs

What are the features of flat die feed pellet mill?

The roller and die: flat die adopts high quality wear-resisting alloy steel and processed by special heat treatment.
The hopper adopts thickening material to help strengthen it.
The main box adopts high quality welding structure to have low noise and shock-absorbing ability.
The electrical components adopt famous CHINT AND SIEMENS brands and processed by parkerising, acid pickling and spraying plastics. It is also designed with radiation structure.

flat die pellet mill can is of special pellet mill design with a running die mould and stationary rollers.

flat die pellet mill can is of special pellet mill design with a running die mould and stationary rollers. The advantages of this design is low electricity consumption and efficient in making feed pellets. This portable feed pellet mill can process corn, bean dregs, straw, grass and rice hull powder into granulated pellets. You just put the pellet mill on the flat ground and then put the feedstock into feeding mouth, then the material will be pressed into the die hole by the friction between die mould and rollers. Usually the gap between die and rollers is 0.1-0.3mm for making feed pellets. The feed pellet length can be adjusted by the cutting knife. You can replace flat die to making feed pellets with different diameters of die holes. After the pellet die has been used for a period, you can turn oven it and continue to work.

Electric Flat Die Pellet Mill Features
1. Quick disassembling type precisely-cast die clamp is adopted to connect the die and quill flange, able to change new die and rollers fast and conveniently according to your needs.
2. Visibility. It is possible to view into the chamber when pelletizing, so you can solve problem in time.
3. Simple operation, easy maintenance and perfect technical design with less labor.
4. Small and light weight which make it widely used in home, small farm.
5. Geat for processing soft wood pellets and feed pellets

Portable Pellet Mill, as its name suggests, is a kind of movable pellet making machine used for producing pellets. Now it is increasingly welcomed by families not only because of high efficiency, energy conservation and environment protection, but also the convenience and flexibility. You can easily move it to places where there are raw materials.There are mainly three kinds of portable pellet mill in our company: pellet mill with electric motor, pellet mill with diesel engine and PTO pellet mill. They differ in the driven modes.
Pellet mill with electric motor is most widespread portable machine in the world. Where there is electricity, this machine can be driven and operated. Pellet mill with diesel engine is appropriate for places where the diesel is available. Compared with above one, it is more flexible. You can use it on the farm, orchard or anywhere the raw material can be got just with diesel added. PTO pellet mill means power take- off. It is designed to be added on a tractor or truck so that it can draw energy from their engine. This kind of machine is the most portable and flexible one.