Pellet machine can produce animal feed pellets and wood sawdust pellets which is flat die pellet mill,Directly before the pelleting press, a product with a granular size of approx. 4 mm and a residual moisture content of approx. 15 % is required
grass pellet machine adopts the high accuracy gear driving
This series grass pellet mill can be powered by both diesel engine and e-motor.signi machinery ,We adopt the new design of direct connection of motor shaft and he main shaft that overcome the loose defect of belt connecting as long time using. When the raw materials are added in the template by pressing roller, they will be heated to 60~80 degrees by the friction among them. After being pressed through the template, the fodder will be thrown out from the feed pellet machine in a state of granule. You can choose the size of the granules by using different template with different size of holes in it.
A diesel engine is another choice to drive the machine, together with the clutch and accelerating decelerating device to change its speed. It is still for the belt to drive the main shaft. The feed pellet making machine can run smoothly and with few noises.
The main features of sunflower stalk pellet mill
1.The main drive of our grass pellet machine adopts the high accuracy gear driving, so the output is 20% more than the belt drive.It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type grass pellet machine with belt-convey.
2.the grass pellet mill uses the SKF bearings, NAK oil seal to make sure the high-efficiency, stable performance and low noisy of the whole machine. And it uses the Siemens or Wannan brand of motor.
3.The pelletizing chamber is equipped with air suction cooling system.
4.The feeder of our grass pellet machine uses variable-frequency and variable-speed motor to make sure the good quality of the pellet.
5.Advanced world standard compensatory S-shaped coupling with the structure of novel, compact, safe, low-noisy and low fault.
6.Feeder, conditioner and chute of our wood pellet machine made of stainless steel with long service life.
7.Our grass pellet machine with magnet and over load protection system, which can protect machine well during production
8.We have different bore diameter of the ring dies for your choice. And the feeder is with a variable speed controlled to meet different outputs requirements.
Features of small scale cow/fish/ poultry pellet mill
Our feed pellet mill is appropriate for crude fiber compression forming, such as: maize straw, peanut shell, rice husk, corncob, cotton seed hull, wheat-straw, sunflower seed shell, sawdust, cotton stalk, weeds, etc. all kinds of agricultural straws, house refuse, waste plastic and wastes in factory. the feed pellet machine is also suitable for raw materials which are difficult to form with low bonding ratio. Furthermore, organic bacterial manure, organic fertilizer and compound fertilizer are applicable to pelletize under low temperature. They are also good for most biomass materials.This serious of poultry feed mill are mainly used for making the wood pellets applies for raw material like wood waste or agricultural waste, such as corn/wheat/rice straw, coffee/peanut shell, etc. The pellets are used as fuels in electricity-generating and water –heating in power plant industry, boiler factories, etc.
Features of small scale cow/fish/ poultry pellet mill
1.the small scale poultry feed mill is wide suitability of materials, like sawdust, leaf, straw and other biomass materials.
Features of small scale cow/fish/ poultry pellet mill
1.the small scale poultry feed mill is wide suitability of materials, like sawdust, leaf, straw and other biomass materials.
2.the small scale poultry feed mill has stable performance, high output and low power consumption. Simple maintaining, low failure rate, easy operation.
3.The small scale feed pellet machine is casting as an integer with firm structure and long life span, motor-driven pellet press or diesel engine-driven pellet press are available for choosing according to the clients requirements.
4.High temperature heat treatment of flat die and compressing rollers, lower cost of high resistance spare parts.
3.The small scale feed pellet machine is casting as an integer with firm structure and long life span, motor-driven pellet press or diesel engine-driven pellet press are available for choosing according to the clients requirements.
4.High temperature heat treatment of flat die and compressing rollers, lower cost of high resistance spare parts.
5.High ratio of molding and high density of pellets.
6. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey;
7. The bearing and oil seal in the main drive are imported from Japan to ensure highly-efficient, stability, credibility;
8. The alloy steel die is with international advanced equipment and technics, and has long service life, slippery pellet and high quality.
6. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey;
7. The bearing and oil seal in the main drive are imported from Japan to ensure highly-efficient, stability, credibility;
8. The alloy steel die is with international advanced equipment and technics, and has long service life, slippery pellet and high quality.
Subscribe to:
Posts (Atom)